Grabo Electric Vacuum Suction Cup Replacement Foam-rubber Sealing Pads
NOTE: This link does not contain any machines, just replacement seals
The seals on Grabo will wear out with continuous usage, which causes the lifting capacity diminishes. In this case, you can replace the worn seal by hand within seconds.
This seal fits all GRABO models, including Nemo GRABO, GRABO Pro lifter-20, RTC tools GRABO, FXAH-120 Probst GRABO, Topspin Powertools GRABO and other co-branded units.
Specification:
| Black foam seal | |
|---|---|
| Material | SBR rubber foam sponge |
| Color | Black |
| L x W x H | 11.5 x 6.9 x 0.7” (293 x 175 x 19 mm) |
| Density | 10.6 Lb/cft (170 kg/m^3) |
| Hardness, Shore C | ~10 +/-2 |
| Tearing Pressure | 1800 Psi (126 kg/cm^2) |
| Compression to 25% size at | 8.5 Psi (6000 kg/m^2) |
| Water Absorption, % | <=5 |
| Shrinkage at 160F (70C) for 24 hrs, % | <=20 |
| Recommended Storage Temperature | Room temperature |
| Red seal | |
| Material | Silicon Foam |
| Color | Red |
| Density | 40.5 Lb/cft (650 kg/m^3) |
| Hardness, Shore C | 55 +/-5 |
| Water Absorption, % | <=4 |
| Recommended Storage Temperature | Room temperature |
only for US customer
Due to a mold problem at our factory, there were some problems with the suction cups on a batch of CarriX™ in our US warehouse. However, since the good ones and the defective ones were mixed together, we couldn't determine which ones were defective, so we offered discounts on the goods in that warehouse.
Buy a CarriX™ frame and get 8 suction cups for free (some of the suction cups may be good, some may be defective, Of course, it is possible that what you get is completely good.)
If you want to use CarriX™ with Grabo pro lifter, you will also get 8 extra suction cups for free.
KNOW MORE